Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- n900-flashen [2012/09/17 08:19] – [Zusammenfassung] tom
+++ n900-flashen [2025/05/03 09:10] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 48: / Zeile 48: @@
 Nach dieser Anleitung: [[http://technomagus.wordpress.com/mobile/phones/n900/reset-n900-flashing-back-to-original-state/|genau Beschreibung]]
+Firmware (Image):
+  * RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
+eMMC (Vanilla):
+  * RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin
+flashen in genau dieser Reihenfolge:
+  $ sudo flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
+  $ sudo flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R
 ==== Zusammenfassung ====
-Flashing eMMC and Maemo
 eMMC has to be flashed first. Afterwards Maemo system is flashed separately. This will wipe out everything you have installed and configured in internal memory. Removable memory card is not affected. So, BACK UP ALL DATA in internal memory, like pictures, videos, documents etc. Once this is done, you may proceed.
 . TURN OFF the phone
@@ Zeile 70: / Zeile 78: @@
 Now your phone is in “factory state”.\\
 You have Fremantle PR 1.3 in phone, but otherwise all your previous settings and extra applications are gone.
------------------------------------------------------------
-Firmware:
-  * RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
-eMMC:
-  * RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin
-flashen:
-  $ sudo flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f
-  $ sudo flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f -R